3 Corporate Park Dr., Unit 1
Derry, NH 03038
Toll Free: (800) 821-0023
Phone: (603) 434-1433
Fax: (603) 434-1653
sales@martelcorp.com |
Legacy Calibrator Products
| PSC-4000 Process Signal Calibrator |
 |
The Martel Electronics PSC-4000
Process Calibrator is a portable, hand-held, full function
voltage and current calibrator with the capability to both
read and simulate common process control signals. |
Download Datasheet |
|
| T-140B "Wally-Cal" Analog
Gauge Upgrade |
Replaces the fragile analog gauge
in Wallace & Tiernan calibrators with a high accuracy
digital calibrator. The T140B Analog Gauge upgrade allows
users of Wallace & Tiernan calibrators to upgrade from
the internal, fragile meter to a more accurate digital calibrator.
Have one of our authorized Certified Calibration Service
Centers complete the upgrade for you at a fraction of the
cost of installing a new analog meter. Each unit includes:
Drop in faceplate with hardware, 9 volt battery installed,
Instruction Manual. |
Download Datasheet |
|
| T-150 Frequency Calibrator |
 |
The T-150 frequency calibrator can
generate or read frequencies ranging from 1 count per minute
to 100 kHz allowing it to be used for a wide range of flow
measuring instrumentation. The Tuff-Tools line of calibrators
is designed to give the technician laboratory grade accuracy
in a family of rugged, easy to use instruments. Operation
of these calibrators is made easy through the use of a sealed
membrane keypad with simple controls. The outputs are set
through the use of step and ramp keys which allows both
large and small output changes to be made with ease. |
Download Datasheet |
|
| WC-1 "Wally-Cal" Pneumatic
Calibrator Upgrade |
Send in your old "Wally Box"
for an economical conversion and get years more use! You
can have one of our authorized Certified Calibration Service
Centers upgrade it for you with a brand-new faceplate and
replace the expensive analog "guts" with a digital
pressure indicator. All of the functions and ranges of the
original model are sup-ported, and the accuracy specifications
are even better. Your new Wally-Cal I will also feature
0.001 PSI resolution, 0 to 24 mADC and 0 to 20 VDC input
ranges, and an integral 24 V loop power supply. Pressure
range is 0 to 30 PSI, and a selection of eight engineering
units are built in. Call today for more information on ordering
your "better-than-new" calibrator upgrade! Each
Unit Includes: Test leads, AC adapter/charger, new face
plate with digital indicator installed, rechargeable AA
NiCd battery pack installed. |
Download Datasheet |
|
|
|
